×
Prolonged power outages can cause entire homes to lose power and disable high-power appliances. Addressing this key household electricity pain point, the 11KW 24KWh all-in-one home solar energy storage system has recently been officially launched. Eq...
Read More
Addressing these two major pain points: difficulty sourcing electricity for outdoor travel and insufficient power supply in emergency situations, the 2500W AC output portable energy storage system (iron-cased version) has recently been officially launched. Equipped with a 1920WH lithium iron phosphate battery and a 2500W inverter, combined with core features such as BMS intelligent management and multiple charging/output modes, it provides a "high-power + long-range" power solution for outdoor camping, home emergencies, small-scale operations, and more. Core Advantages: Six Key Features Address User Needs High Power and Long Battery Life, No Power Consumption Anxiety: 2500W sine wave output, stable waveform, and no damage to laptops, projectors, small appliances, and other devices; 1920WH high-rate lithium iron phosphate battery, sufficient power and guaranteed capacity, meeting the long-term power needs of multiple outdoor devices; BMS Intelligent Management, Safe and Durable: Built-in BMS intelligent battery management system monitors battery status in real time to prevent overcharging, over-discharging, and short circuits. The iron shell provides both protection and durability. Fast Charging + Multiple Charging Methods, Flexible Recharging: Supports fast charging protocols to shorten charging wait times; compatible with multiple charging methods such as mains power, solar panels, and vehicle-mounted charging, allowing flexible selection based on outdoor/emergency scenarios to avoid unnecessary charging. Power outage and power outage prevention; Simultaneous output for multiple devices, adapting to diverse needs: Supporting AC, DC, and wireless charging ports, it can simultaneously power mobile phones, computers, camping lanterns, small refrigerators, and more, providing a one-stop solution for multi-device power needs. Intelligent temperature control, stable operation: Equipped with an intelligent temperature-controlled cooling fan, it automatically adjusts the heat dissipation intensity according to temperature changes, maintaining system stability even in high-temperature environments and preventing overheating. Portable design, wide application compatibility: The iron shell is both lightweight and protective, making it easy to carry outdoors. It can meet the needs of short-term power outage emergencies at home, as well as mobile power applications such as camping, RVing, and outdoor work. Highly valuable in various scenarios, becoming a new choice for outdoor and emergency use. Since its launch, the system has quickly attracted the attention of outdoor enthusiasts and home users. A camping blogger commented, "The 2500W power can power a small oven, and the 1920WH of energy is enough for 2-3 people camping for two days. The wireless charging and multiple ports are super convenient." Another homeowner commented, "It can power the refrigerator, lights, and router during a power outage, and the smart temperature control eliminates the worry of overheating. It's more practical than traditional emergency power supplies." Industry analysts point out that this type of "high-power + multi-functional" portable energy storage system not only fills the gap in outdoor high-power consumption but also meets household emergency needs, and is expected to become a mainstream choice for outdoor equipment and home backup power. For product specifications, sample testing, or a quote, please contact us for a consultation!
Read More
Small apartments face limited space, and short power outages can disrupt daily life. To address this unmet need, the 5.5KW 5.12KWh integrated home solar energy storage system has recently been officially launched. Designed with compact design, a lith...
Read More
Power outages and high energy consumption from high-power devices like air conditioners and heaters have long plagued household electricity use. Recently, a 10kW/10kW LiFePO4 home solar energy storage system, designed specifically for homes, was officially launched. Combining a "5.5kW solar panel + 5kW inverter" solution, it can handle power outage emergencies while supporting the stable operation of high-power devices, providing a "clean and reliable" dual guarantee for household electricity. Core Configuration and Functions: Precisely Matched to Home Needs This system is designed around "high power, strong adaptability, and ease of use," with key parameters and functions addressing key pain points: High-power emergency response, covering core devices: 10kW output power + 10.24kWh rated capacity, capable of stably driving high-power appliances like air conditioners and heaters. Automatically switching power during power outages prevents equipment downtime in hot or cold weather. Efficient Solar Energy Recharge: Equipped with a 5.5kW solar panel (compatible with mainstream monocrystalline N-type, Topcon, and Perc models) and a Maximum Power Point Tracking (MPPT) controller, it efficiently converts solar energy during the day, prioritizing home electricity and reducing reliance on grid-connected power. Widely adaptable and easy to install: The inverter supports single-phase, split-phase, and three-phase output, with output voltages ranging from 110-220V and frequency adaptability. 50/60Hz, easy to install without modifying your home's electrical circuits. Powered by pulse-width modulation (PWM) technology, it ensures stable power transmission, protecting sensitive equipment like refrigerators and computers. This one-stop solution is hassle-free: It includes a complete set of components, including solar panels, inverters, and batteries. No additional configuration is required. After installation, it completes the "solar power generation - energy storage - power supply" closed loop, making it suitable for most household scenarios. Highlighting its value in specific scenarios, it promotes home energy upgrades. Compared to traditional low-power energy storage products, this system's core advantage lies in its ability to handle high-power loads. This eliminates the need to worry about power shortages when running air conditioners in the summer or heaters in the winter. It can also meet the needs of basic household electricity needs and high-power equipment during power outages ranging from a few hours to one to two days. A pilot user reported that using the system with solar power reduced their monthly electricity bill by approximately 20%. The air conditioner also continues to operate normally during outages, completely eliminating power outage anxiety. Industry insiders say this type of high-power home energy storage system not only meets the urgent need for emergency power but also supports the trend toward clean electricity, making it a promising option for residents seeking energy upgrades. For solution details, installation services, or localized quotes, please contact us!
Read More
Targeting the power supply pain points of critical scenarios, a customized high-reliability energy storage solution is available.Hospital life support equipment and data center servers have stringent requirements for uninterrupted power supply. Tradi...
Read More
Focusing on user pain points, we offer targeted energy storage solutions for small and medium-sized households.With the increasing number of household electrical appliances and occasional short-term power outages in some areas, small and medium-sized...
Read More
Whether you're looking to lower your electricity bill at home, reduce energy consumption at a business, or maintain continuous power for outdoor equipment, our solar panel solutions are precisely tailored. Leveraging efficient power generation techno...
Read More![[Shanghai Villa Case Study] A Home Storage System Saves 13,000 Yuan Annually in Electricity Bills! Even Provides Security and Lighting During Power Outages](https://shopcdnpro.grainajz.com/category/397503/3274/456f0b371a1e632b0550431c2a6a75a5/587b43fd952716f8af6818e50e4a4efe.jpg)
A 400-square-meter villa in Baoshan District, Shanghai, faced an annual electricity bill exceeding 22,000 Yuan due to aging wiring and a surge in electrical equipment (central air conditioning, floor heating, and new energy vehicle charging stations)...
Read More
Discover if solar can fully power your home. Learn about system sizing, battery storage, and incentives that make solar energy independence possible. Get expert insights now.
Read More
Amidst the wave of energy transformation, home energy storage systems are gaining momentum, bringing a new energy solution to countless households. They not only free you from the worry of soaring electricity bills, but also ensure smooth home electr...
Read More
With the growing demand for power for mobility and home emergencies, a high-performance car inverter has become a favorite for many users. Recently, 2000W and 4000W car inverters have launched, capable of converting DC 12V/24V to AC 110V/240V, provid...
Read More
Live footage of the home energy storage system's factory production has been released, providing full transparency from battery cell selection to precision assembly. Its core features, including "excess power storage + power outage backup + intelligent monitoring," provide home users with an efficient and stable power solution, attracting market attention. Factory Production: Selected Battery Cells + Precision Assembly Ensure Product Quality The live footage demonstrates the rigorous control of every step in the production of the home energy storage system: Careful Cell Selection: Each battery cell undergoes consistency testing to eliminate substandard products, ensuring stable energy storage capacity and a long cycle life; Precision Assembly: Automated equipment is used for cell series and parallel connection and packaging, reducing manual errors and ensuring safe system operation; Factory Inspection: Finished products must pass voltage and load tests and meet safety standards before they are released, ensuring a reliable quality assurance for home use. Core Functions: Three Advantages, Addressing Home Electricity Pain Points This home energy storage system offers three core functions tailored to the needs of home users: Surplus Power Storage and Cost Reduction: It can store excess power from photovoltaic power generation or during off-peak hours, discharging it for use during peak hours, significantly reducing household electricity bills. Automatic Power Outage Recharge: During a power outage, it automatically switches to energy storage mode, ensuring the normal operation of home appliances such as refrigerators, lighting, and routers, preventing disruptions to daily life. Smart Mobile Control: It supports remote monitoring of remaining power and usage, and can start and stop the system with one click on your phone, making operation convenient and worry-free.
Read More
Hot News2025-11-21
2025-11-19
2025-11-12
2025-11-11
2025-11-05
2025-11-04
Guangdong Ruihan Electronics Technology Co., Ltd. offers premium solar inverters, panels, and energy storage systems. Our advanced technology and automated production ensure superior performance and durability. Trusted by partners worldwide. Request a quote today.
Room 1603, Building 1, Tian'an Headquarters Center, No. 555 Panyu Avenue North, Donghuan Street，Guangzhou，Guangdong
Copyright © 2025 by Guangdong Ruihan Electronics Technology Co., Ltd. Privacy Policy
EN
